Sena STRYKER - Legend; Powering on and off; Checking the Battery Level; Volume Adjustment

Stryker Motorcycle Bluetooth
®
Helmet with Mesh Intercom™ | 22
3 GETTING STARTED
3.3 Legend
1x
TAP
Tap button the specified
number of times
10s
HOLD
Press and Hold button for
the specified amount of time
“Hello”
Audible prompt
3.4 Powering On and Off
Powering On
=
1s
HOLD
Powering Off
=
1x
TAP
3.5 Checking the Battery Level
Instructions are for when powering the Bluetooth system on.
Powering On
=
1s
HOLD
=
=
=
Note: When the battery is low while in use, you will hear a voice
prompt saying “Low battery”.
3.6 Volume Adjustment
You can raise or lower the volume by tapping the (+) Button or the
(-) Button. Volume is set and maintained independently at different
levels for each audio source (i.e., phone, intercom), even when the
Bluetooth system is rebooted.
Volume Up
=
1x
TAP
Volume Down
=
1x
TAP