EasyManua.ls Logo

Sena STRYKER - VOX Sensitivity (Default: 3); HD Intercom (Default: Enable); HD Voice (Default: Enable)

Sena STRYKER
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Stryker Motorcycle Bluetooth
®
Helmet with Mesh Intercom™ | 64
15 CONFIGURATION SETTING
15.2.5 VOX Sensitivity (Default: 3)
VOX Sensitivity can be adjusted depending on your riding environment.
Level 5 is the highest sensitivity setting and level 1 is the lowest.
15.2.6 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality
to HD quality. HD Intercom will become temporarily disabled when you
enter into a multi-way intercom. If this feature is disabled, the two-way
intercom audio will change to normal quality.
Note:
The intercom distance of HD Intercom is relatively shorter than
that of normal intercom.
HD Intercom will become disabled temporarily when Bluetooth
Intercom Audio Multitasking is enabled.
15.2.7 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone
calls. This feature increases the quality so that the audio will be crisp
and clear during phone call conversations. If this feature is enabled,
incoming phone calls will interrupt intercom conversations and audio
from the SR10 will not be heard during intercom conversations. Three-
Way Conference Phone Call with Intercom Participant will not be
available if HD Voice is enabled.
Note:
Refer to the manufacturer of your Bluetooth device that will be
connected to the Bluetooth system to see if it supports HD Voice.
HD Voice is active only when Bluetooth Intercom Audio
Multitasking is disabled.

Table of Contents

Other manuals for Sena STRYKER

Related product manuals