Sena STRYKER - GPS Pairing

Stryker Motorcycle Bluetooth
®
Helmet with Mesh Intercom™ | 27
4 PAIRING THE BLUETOOTH SYSTEM WITH OTHER BLUETOOTH DEVICES
3. Select Stryker in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
Stryker
4.4 GPS Pairing
1. Press and hold the Center Button for 10 seconds.
=
10s
HOLD
“ Configuration menu”
2. Tap the (+) Button 5 times.
=
5x
TAP
Blinking
“ GPS pairing”
3. Select Stryker in the list of devices
detected. If your Bluetooth device
asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
Stryker
Note: If you pair your GPS device via GPS Pairing, its instruction will
not interrupt your Mesh Intercom conversations, but overlay with
them. Bluetooth intercom conversations will be interrupted by GPS
instructions.