Sena STRYKER - Mesh Intercom & Open Mesh Usage

Stryker Motorcycle Bluetooth
®
Helmet with Mesh Intercom™ | 34
7 MESH INTERCOM
7. 2 Starting Mesh Intercom
When Mesh Intercom is enabled, the Stryker will automatically connect
to nearby Stryker users and allow them to talk to each other by pressing
the Mesh Intercom Button.
Mesh Intercom On
=
1x
TAP
Blinking
“ Mesh intercom
on, Open Mesh,
channel 1”
Mesh Intercom Off
=
1x
TAP
“ Mesh intercom off”
7.3 Using the Mesh in Open Mesh
When Mesh Intercom is enabled, the Bluetooth system will be in Open
Mesh (default: channel 1) initially.
7.3.1 Channel Setting (Default: channel 1)
If the Open Mesh communication experiences interference because
other groups are also using channel 1 (default), change the channel.
You can select from channels 1 to 9.
1. Double tap the Mesh Intercom Button.
=
2x
TAP
“ Channel setting, 1”
2. Navigate between channels.
(1
2 ••• 8 9 Exit 1 •••)
=
1x
TAP
or
=
1x
TAP
“#”