Sena STRYKER User Manual

Stryker Motorcycle Bluetooth
®
Helmet with Mesh Intercom™ | 25
4 PAIRING THE BLUETOOTH SYSTEM WITH OTHER BLUETOOTH DEVICES
4.1.3 Pairing When the Stryker is Turned On
1. While the Bluetooth system is on, press and hold the Center Button
for 10 seconds.
=
10s
HOLD
“ Configuration menu”
2. Tap the (+) Button.
=
1x
TAP
Blinking
“ Phone Pairing”
3. Select Stryker in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
Stryker
4.2 Second Mobile Phone Pairing - Second Mobile
Phone, GPS, and SR10
1. Press and hold the Center Button for 10 seconds.
=
10s
HOLD
“ Configuration menu”
2. Double tap the (+) Button.
=
2x
TAP
Blinking
“ Second mobile
phone pairing”
3. Select Stryker in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
Stryker

Sena STRYKER Specifications

General

Bluetooth	Bluetooth 5.0
Intercom Range	Up to 2 km (1.2 miles)
Intercom Participants	Up to 4 riders
FM Radio	Yes
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Charging Temperature	0°C to 45°C (32°F to 113°F)
Codec	Built-in SBC Codec
Audio Multitasking	Yes
Voice Command	Yes
Charging Time	Approximately 3 hours
Profiles	HSP, HFP, A2DP, AVRCP
Audio	Advanced Noise Control
Battery Type	Lithium Polymer Battery
Mobile App Support	Yes (Sena Motorcycle App)
Sizes	M, L, XL