Need help?Do you have a question about the Sena SRL3 and is the answer not in the manual?
General| Charging Time | 2.5 hours |
|---|---|
| Advanced Noise Control | Yes |
| Boom Microphone | Yes |
| Bluetooth Profile | HSP, HFP, A2DP, AVRCP |
| Supports Group Mesh Intercom | Yes |
| Certificates | CE, FCC, IC |
| Music Sharing | Yes |
| Voice Commands | Yes |
| FM Radio | Yes |
| Operating Temperature | -10°C to 55°C |
| Speaker Driver Unit | 40 mm |
| Battery Type | Lithium |
| Suitable for | Shoei GT-Air II, Shoei Neotec II, Shoei J-Cruise II |
| Compatibility | Shoei GT-Air II, Shoei Neotec II, Shoei J-Cruise II |
| Speaker Type | HD |
| Mobile App Support | Yes |
| Intercom Participants | 4 |
Key features: Bluetooth 5.0, Mesh Intercom up to 2km, Audio Multitasking.
Instructions for preparing helmet shell and module cover for headset installation.
Steps for installing battery module, microphones, speakers, and antenna components onto the helmet.
Instructions on how to charge the SRL3 headset using various cables.
Procedures for turning the headset on and off via button combinations.
Comprehensive guide for pairing the headset with a mobile phone.
Steps to activate the initial phone pairing mode on the headset.
How to answer, reject, and end phone calls using the headset controls.
Controls for playing, pausing, and navigating music tracks via Bluetooth.
Explanation of Sena's Mesh Intercom system and its capabilities.
Details on using the Open Mesh mode for group intercom conversations.
Details on using the Group Mesh mode for private intercom conversations.
Procedures for enabling and disabling the Mesh Intercom feature.
Instructions for creating and joining group meshes for private communication.
Methods for pairing with other Sena headsets for intercom communication.
Pairing headsets via QR codes using the Sena Motorcycles App.
Steps to initiate and end a two-way intercom conversation with a friend.
Enables conference-call style conversations with up to three friends.
Procedures for establishing a three-way intercom conference.
Steps to pair the headset with non-Sena Bluetooth headsets.
A comprehensive list of available voice commands and their corresponding functions.
Overview of the methods available for upgrading the headset's firmware.
How to access and navigate the headset's main configuration menu.
Step-by-step guide to reset the headset using the pinhole fault reset button.
Procedure to restore the headset to its original factory default settings.
To Next Page
