Sena SRL3 - 13.1.1 Delete All Pairings; 13.2 Software Configuration Setting

13 CONFIGURATION SETTING
SRL3 Motorcycle Communication System for Shoei Comlink | 56
13.1.1 Delete All Pairings
You can delete all Bluetooth pairing information of the headset.
13.1.2 Remote Control Pairing
You can remotely control the headset using Sena Remote Control
devices (sold separately).
1. Turn on the headset and the Remote Control device.
2. Execute Remote Control Pairing.
3. Enter pairing mode in the Remote Control device. The headset will
automatically connect with the Remote Control device in pairing
mode.
13.2 Software Configuration Setting
You can change the settings of the headset through the Sena
Motorcycles App or the Sena Device Manager.
Sena Motorcycles Sena Device Manager
13.2.1 Headset Language
You can select the device language. The selected language is
maintained even when the headset is rebooted.
13.2.2 Mesh Reach-Out (Default: Disable)
When the Mesh Reach-Out is enabled, a Mesh Reach-Out request
message can be sent or received. If the Mesh Reach-Out is disabled, a
Mesh Reach-Out request message cannot be sent or received.