Sena SRL3 - 3.4 Powering On and Off; 3.5 Checking the Battery Level

3 GETTING STARTED
SRL3 Motorcycle Communication System for Shoei Comlink | 17
Note:
• Please make sure to take off your SRL3-installed helmet while
charging. The headset automatically turns off during charging.
• Any 3rd party USB charger can be used with Sena products if the
charger is approved by either the FCC, CE, IC, or other locally
approved agencies.
• Use of a non-approved charger may cause fire, explosion,
leakage, and other hazards which may also reduce the life time or
performance of the battery..
3.3 Legend
1x
TAP
Tap button the specified
number of times
3s
HOLD
Press and Hold button for the
specified amount of time
“Hello”
Audible prompt
3.4 Powering On and Off
Powering On
=
1s
HOLD
Powering Off
=
1x
TAP
3.5 Checking the Battery Level
Instructions are for when powering the headset on.
Powering On
=
1s
HOLD
=
=
=
Note: When the battery is low while in use, you will hear a voice
prompt saying “Low battery.”