Sena SRL3 - 4.1.2 Pairing When the SRL3 is Turned Off

4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
SRL3 Motorcycle Communication System for Shoei Comlink | 20
2. Select SRL3 in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
SRL3
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.
4.1.2 Pairing When the SRL3 is Turned Off
1. While the headset is off, press and hold the Center Button and the
(+) Button until the LED flashes red and blue alternately and you hear
a voice prompt, “Phone pairing.”
=
HOLD
Blinking
“ Phone pairing”
2. Select SRL3 in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
SRL3