SRL3 Motorcycle Communication System for Shoei Comlink | 44
9. UNIVERSAL INTERCOM
Universal Intercom allows you to have intercom conversations with
users of non-Sena Bluetooth headsets. Non-Sena Bluetooth headset
can be connected to the Sena headset if they support the Bluetooth
Hands-Free Profile (HFP). You can pair the headset with only one
non-Sena headset at a time. The intercom distance depends on the
performance of the headset to which it’s connected. When a non-Sena
headset is paired with the headset while another Bluetooth device is
paired via Second Mobile Phone Pairing, it will be disconnected.
9.1 Universal Intercom Pairing
1.
=
10s
HOLD
“ Configuration menu”
2.
=
3x
TAP
“ Universal intercom
pairing”
3.
=
1x
TAP
Enter into Universal
Intercom Pairing mode.
4. Put the non-Sena headset in Hands-free Pairing Mode. The headset
will automatically pair with a non-Sena Bluetooth headset.
9.2 Two-Way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as you
would between other Sena headsets.
A
YOU
Non-Sena
Headset
You may start/end a Two-Way Universal Intercom using the same way
as you do in a normal Two-Way Intercom. Please refer to Section 8.3:
“Two-Way Intercom.”
CHAPTER
To Next Page
Loading...
