7 MESH INTERCOM
SRL3 Motorcycle Communication System for Shoei Comlink | 34
7.7 Mesh Reach-Out Request
You (caller) can send a request message to turn on the Mesh Intercom
to nearby* friends who have it turned off.
1. If you want to send or receive a request message, you need to enable
Mesh Reach-Out on the Sena Motorcycles App. Please refer to
Section 13.2: “Software Configuration Setting.”
2. While your headset’s Mesh Intercom is on, you (caller) send a request
message using the headset’s Button or the Sena Motorcycles App.
[Caller]
=
3x
TAP
[Caller]
“ Mesh reach-out
request”
[Nearby Friends]
“ Mesh intercom
requested”
3. Friends who receive the request message need to manually turn
on their Mesh Intercom using the headset’s Button or the Sena
Motorcycles App.
Note:
• *: Up to 100 m (109 yds) in open terrain
• To use the Mesh Reach-Out Request function, you (caller)
who sends a request message and the friends who receive
the request message must update the headset to the latest
firmware version and the app to the latest version.
7.8 Reset Mesh
If the headset in an Open Mesh or Group Mesh resets the Mesh, it will
automatically return to Open Mesh (default: channel 1).
=
8s
HOLD
“Reset Mesh”
To Next Page
Loading...
