Sena SF1-01 - Installing the Microphones

SF Series
11
English
3. Align the arrows on the main unit and microphone cables and
insert the microphone cable into the microphone connector.
3.3.2 Using the Wired Microphone
1. Peel off the cover of the hook and loop fastener for the wired
microphone to expose the adhesive tape. Then, attach the hook
and loop fastener on the inside of the helmet’s chin guard.
2. Attach the wired microphone to the hook and loop fastener for the
wired microphone.
3. Align the arrows on the main unit and microphone cables and
insert the microphone cable into the microphone connector.