Sena ACS-RAM - Pairing When Turned Off; Pairing When Turned On

ACS-RAM Motorcycle Bluetooth
®
Communication System | 14
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
4.1.2 Pairing When the ACS-RAM is Turned Off
1. While the headset is off, press and hold the (+) Button and the
(-) Button until the LED flashes red and blue alternately and you hear
a voice prompt, “Phone pairing.”
=
HOLD
Blinking
“ Phone pairing”
2. Select ACS-RAM in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000.
Device B
Pi
Bluetooth
ACS
-
RAM
4.1.3 Pairing When the ACS-RAM is Turned On
1. While the headset is on, press and hold the Center Button for
10 seconds.
=
10s
HOLD
“ Configuration menu”
2. Tap the (+) Button.
=
1x
TAP
Blinking
“ Phone pairing”
3. Select ACS-RAM in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000.
Device B
Pi
Bluetooth
ACS
-
RAM