Sena 50S - Troubleshooting; Fault Reset

50S Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 66
15. TROUBLESHOOTING
Please visit sena.com for answers to frequently asked questions. This
detailed online FAQ section deals with troubleshooting, illustrates case
studies and contains tips on using the headset.
Click Here to Visit sena.com
15.1 Fault Reset
When the headset is not working properly, you can easily reset the unit:
1. Locate the Pinhole Fault Reset Button below on the back of the
main unit.
2. Gently insert a paperclip into the hole and tap the Pinhole Fault
Reset Button with light pressure.
1x
TAP
=
FAULT
RESET
3. The headset will shut down.
Note: Fault Reset will not restore the headset to factory default
settings.
CHAPTER