Sena Bluetooth Audio Pack for GoPro - Factory Reset

19
English
Factory Reset
Through the factory reset, you can restore
the factory default settings of the Bluetooth
Audio Pack. Then all of the previous pairing
information is deleted.
1
Press and hold the Pairing Button for
10 seconds to enter the factory reset
mode. Then the LED will turn red and
you can hear the voice prompts from the
connected headset.
2
Press the Pairing Button again to reset the
Bluetooth Audio Pack.
10 sec.
Press
If you do not press the Pairing Button within
10 seconds after being entered to the factory
reset mode, the Bluetooth Audio Pack will
exit the factory reset mode automatically.