SENAO SN-358 PLUS - Installation; A. Base Unit; B. Handset; C. Optional Travel charger

)4*
Installation
A. Base Unit
Please set up the base unit according to the following steps.
(1) Install the telescopic antenna of the
base unit and extend it fully and
vertically.
(2) Plug in the SENAO AC
adaptor to DC IN jack.
(2) (6) (5) (4)
(3) Plug the AC adaptor into
supporting wall outlet.
(4) Insert the included
telephone line into
the LINE jack and
also the telephone
line into a wall jack.
(5) A standard telephone
may also be plugged into
TEL jack.
(6) Plug USB cable with
your PC/NB for SKYPE
connection
NOTE: Please refer to P31 for SKYPE Installation.
8