Instruction Manual DS Series Senator Industrial Air Compressors
2024-10-11 © Glenco Air & Power Pty Ltd 38
5.12 Dismantling and Disposal
There is no requirement for the compressor to be dismantled during normal operation other than
for major repair or prior to final disposal at the end of its service life. Dismantling should only
be carried out by a mechanically proficient person with access to proper tools or alternatively
by an authorised Senator dealer for a fee.
The air-oil receiver should be rendered unusable for pressure service prior to disposal, for
example by cutting or massive deformation. This is to prevent its unauthorised and unsafe use
by others.
Do not pollute the environment by improper or illegal disposal of the waste oil or condensate.
Similarly, do not pollute the environment by improper or illegal disposal of the compressor
either as a whole or dismantled. Take the unwanted unit or components to your local recycling
centre instead. The compressor is made almost entirely of metals that can be sold to scrap metal
recyclers.
To Next Page
Loading...