To Next PageTo Next Page
Need help?Do you have a question about the Senco DS232-AC and is the answer not in the manual?
Keep work area clean, avoid hazards, use proper electrical safety practices.
Stay alert, use PPE, dress properly, prevent unintentional starts.
Do not force tool, check switch function, disconnect power before adjustments.
Store tools safely, maintain tools, and follow service guidelines.
Explains the meaning of various safety symbols used in the manual.
Learn how to adjust the nosepiece for different fastener lengths.
Proper steps for loading screws into the tool's feed system.
How to lock the trigger and adjust the depth of drive control.
Operating the tool in reverse and procedures for changing bits.
Steps for changing the nosepiece and adjusting the belt hook.
Daily inspection of moving parts and cleaning the tool.
Information on lubrication requirements for the feed system.
Keep work area clean, avoid hazards, use proper electrical safety practices.
Stay alert, use PPE, dress properly, prevent unintentional starts.
Do not force tool, check switch function, disconnect power before adjustments.
Store tools safely, maintain tools, and follow service guidelines.
Explains the meaning of various safety symbols used in the manual.
Learn how to adjust the nosepiece for different fastener lengths.
Proper steps for loading screws into the tool's feed system.
How to lock the trigger and adjust the depth of drive control.
Operating the tool in reverse and procedures for changing bits.
Steps for changing the nosepiece and adjusting the belt hook.
Daily inspection of moving parts and cleaning the tool.
Information on lubrication requirements for the feed system.
General| Fastener Type | Screws |
|---|---|
| Power Source | Corded Electric |
| Voltage | 120V |
| RPM | 2, 500 |
| Length | 12.5 inches |
| Screw Size | #6 - #12 |
