To Next PageTo Next PageHow to fix air leak near top of Senco Tools and sluggish operation?
If you notice an air leak near the top of your Senco tools or experience sluggish operation, verify the air supply and tighten the screws.
What to do if there is an air leak near bottom of Senco TN11G1 or poor return?
If you observe an air leak near the bottom of your Senco tools or experience poor return, clean the tool and tighten the screws.
Stay alert, use common sense, and wear appropriate safety gear.
Avoid explosive atmospheres and prohibited gas sources.
How to use the secondary trigger for driving fasteners.
Covers warranty periods, exclusions for wear parts, misuse, and industrial use.
Conditions for honoring warranty and limitations on liability.
Stay alert, use common sense, and wear appropriate safety gear.
Avoid explosive atmospheres and prohibited gas sources.
How to use the secondary trigger for driving fasteners.
Covers warranty periods, exclusions for wear parts, misuse, and industrial use.
Conditions for honoring warranty and limitations on liability.
General| Operating Pressure | 70-120 PSI |
|---|---|
| Width | 4.5" |
| Power Source | Pneumatic |
| Tool-Free Depth Adjustment | Yes |
| Tool-Free Jam Release | Yes |
| Fastener Type | Brad Nails |
| Nail Size | 18 Gauge |
| Magazine Capacity | 110 Nails |
