To Next PageTo Next Page
Need help?Do you have a question about the Senco SLS18MG and is the answer not in the manual?
Details the steps for opening the magazine, inserting staples, and closing the magazine.
Position the safety element against the workpiece and pull the trigger to drive fasteners.
Explains the difference and usage of Contact-Actuation (Dual-Action) and Sequential (Restrictive) triggers.
Procedure for disconnecting air and opening the magazine to clear a staple jam.
Inspect the safety element and trigger for free movement when the tool is disconnected.
Troubleshooting for air leaks near the top of the tool or sluggish operation, with solutions.
Troubleshooting for air leaks near the bottom of the tool or poor return, with solutions.
Details the gauge, style, and crown width of staples used with the tools.
Provides a chart of SENCO fastener codes, sizes in inches, and corresponding millimeter measurements.
General
