6 EN
EN
Revision 06/2016Copyright © 2016, Fast ČR, a. s.
Start-up
2. To remove the card, push the card gently until the card lock clicks and slightly slides the
card out from the slot. Use your fi ngers to remove the card completely from the camera.
Note: use your own brand name microSD card and format the card using acomputer
before use. Proper functionality is not guaranteed for non-brand name cards. When card is
inserted the camera checks the applicability of the fi le system, possibly offering formatting.
Use card that is of suffi cient size for the intended use. Camera reports small size or lack of
space left on the card and refuses to perform the desired operation.
3.2. Battery installation and removal
Note: the battery has athin tongue allowing the user to pull out the battery from the tight
battery compartment. Do not remove the tongue.
1. Use your fi ngernail to gently push the fl exible battery compartment closure and open
the cover.
2. Insert the battery completely into the camera battery compartment (with the contacts
aligned). Make sure the removal tab remains accessible.
3. Place the battery compartment cover back on the camera (in the direction towards the
side of the camera) and gently close the cover until the fl exible closure clicks.
4. Battery removal: open the cover and pull on the tab to remove the battery.
AM 4K01W SENCOR EN CZ SK PL HU.indb 6 8.6.2016 14:25:0
To Next Page
Loading...