EasyManua.ls Logo

Sencor SAC MT9040C - Page 9

Sencor SAC MT9040C
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 2 -
01/2024
2024, .
The appliance must be stored in a well-ventilated location,
where the dimensions of the room correspond to the
dimensions specified for its operation.
The appliance must be stored in a room where an open flame
is not continuously in use (e.g. running gas appliance) or where
there are sources of ignition (e.g. running electrical heating
element).
Before connecting the appliance to a power socket, check
that the rated voltage on its rating label matches the electrical
voltage in the power socket.
Connect the appliance only to a properly grounded socket.
The power socket must be freely accessible so that it is
possible to quickly disconnect the power cord from the power
source if necessary.
The appliance is designed for use at home, in offices and
similar types of areas. Do not use it in very dusty or humid
rooms such as laundries or bathrooms, in areas where
chemical or explosive substances are stored, in industrial
surroundings or outdoors.
Do not place the appliance in the vicinity of an open flame or
appliances that are sources of heat.
Do not place the appliance on unstable surfaces such as
carpets with very long and thick fibres.
The appliance may only be used on a dry, stable, smooth and
horizontal surface.
The appliance is equipped with travel wheels, so pay extra
attention when handling it so that it does not fall down stairs or
travel down from sloped areas. If necessary secure the wheels
using the stoppers.
Only use original parts to assemble the appliance. Before
starting to assemble the appliance, make sure that it is turned
off and disconnected from the power socket.

Related product manuals