02/2017
- 3 -
Copyright © 2017, Fast ČR, a.s.
■ Do not submerge the motor unit and its power cord in water or any other liquid, or wash
these parts under running water.
■ When handling the blade assembly, when taking it out of the blending jar or grinder, when
emptying the blending jar and when cleaning it, take special care to avoid injury. The blades
are sharp.
■ Do not turn the appliance on when empty. The incorrect use of the appliance may negatively
affect its lifetime.
■ Always turn off the appliance and disconnect it from the power socket if you will not be
using it and if you will be leaving it without supervision, before assembly, disassembly and
before cleaning or moving it.
■ Check that the motor unit is turned off, disconnected from the power socket and that the
rotating parts have come to acomplete stop before removing the blending jar or grinder
from the motor unit.
■ Ensure that the power plug contacts do not come into contact with moisture. Do not place
heavy items on the power cord. Make sure that the power cord does not hang over the edge
of atable or that it is not touching ahot surface.
■ Do not disconnect the appliance from the power socket by pulling on the power cord. This
could damage the power cord or the power socket. Disconnect the cord from the power
socket by gently pulling on the plug of the power cord.
■ If the power cord is damaged, have it replaced at aprofessional service centre. It is forbidden
to use the appliance if it has adamaged power cord or plug.
■ Do not use the appliance when it is not functioning properly or showing signs of damage.
■ In order to prevent ahazardous situation arising, do not repair the appliance yourself or
modify it in any way. Have all repairs or adjustments performed at an authorised service
centre. By tampering with the appliance you risk voiding your legal rights arising from
unsatisfactory performance or quality warranty.
To Next Page
Loading...
