Seneca Z Line Z170REG-1 - User Manual

ENGLISH 1/16
MI002286-E
Analog and universal
Setting by Dip-Switches
IN, OUT1,OUT2, power
supply are isolated (1500V )~
This document is property of SENECA srl. Duplication and reproduction of its are forbidden (t partial), if not authorized.hough
Contents of present documentation refers to products and technologies described in it. Though we strive for reach perfection
continually, all technical data contained in this document may be modified or added due to technical and commercial needs; it’s
impossible eliminate mismatches and discordances completely. Contents of present documentation is anyhow subjected to
periodical revision. I don’t hesitate to contact our structure or to write us to e-mail addresses as abovef you have any questions
mentioned.
Chapter index
Page
1. Identification data
1
2. Preliminary warnings
2
3. Description and characteristics
3.1 Module description
3.2 General characteristics and features
2
4. Technical specifications
4.1 Inputs
4.2 Outputs
4.3 Connections
4.4 1500 V insulations~
4.5 Power supply
4.6 Module case
4.7 Environmental conditions
4.8 Standards
2
5. Preliminary instructions for use
5
6. Electrical connections
6.1 Safety measures before use
6.2 USB interface
6.3 Connections
5
7. Parameters for use
7.1 Setting parameters
7.2 Dip - Switch tables
7.3 Default configuration
6
8. Decommissioning and disposal
10
9. Purchase order code
10
10. Module layout
10.1 Module layout and signalling LEDs
10.2 Block diagram
10
IN, OUT1,OUT2 are:
SENECA s.r.l.
V
ia Austria, 26 – 35127 – PADOVA – ITALY
Tel. +39.049.8705355 – 8705359 Fax. +39.049.8706287
Internet site: Technical assistance:www.seneca.it support@seneca.it
Commercial reference: sales@seneca.it
USER MANUAL Z Line
Z170REG-1
Universal converter module
with galvanic insulation
between 2 analog outputs
EN

Seneca Z Line Z170REG-1 Specifications