To Next PageTo Next Page
Need help?Do you have a question about the Seneca Z109REG-BP and is the answer not in the manual?
Details universal input, measurement, re-transmission, DIP-switch functions, terminals, USB configuration, and front panel indicators.
Covers sampling frequency, filter, response time, and specifications for voltage, current, thermoresistance (RTD), thermocouple (TC), potentiometer, and rheostat inputs.
Specifies channel numbers, output types (current/voltage), and resolution, along with associated errors and thermal stability.
Lists operating and storage temperature, humidity, altitude, protection degree, and data memory specifications.
Details voltage range (DC/AC) and maximum consumption, advising on fuse protection.
Describes the removable screw terminals and the frontal MicroUSB plug for connectivity.
Provides guidelines for vertical mounting on DIN rail, avoiding obstructions and heat sources.
Lists the electromagnetic emission, immunity, and safety standards the module complies with.
Explains how to set input types and select START/END scale values using DIP-switches.
Details how to set the output mode (voltage/current) and output polarity (normal/reversed) using DIP-switches.
Describes the procedure to set custom START and END scale values using push-buttons and a signal generator.
Explains the meaning of the status LEDs (PWR Green, ALARM Yellow) for power, out-of-range, and errors.
Details additional parameters configurable via PC software, including input types, filters, and output scaling.
Lists default settings for input/output ranges, filter, mains rejection, sampling time, and cold junction compensation.
Shows the physical dimensions and front panel layout with terminal numbering and status indicators.
Provides order codes for the main unit, USB cable, and configuration software.
Gives instructions on the proper disposal of the electronic equipment according to EU directives.
General| Device Type | Media Converter |
|---|---|
| Model | Z109REG-BP |
| Manufacturer | Seneca |
| Power Supply | External |
| Input Voltage | 12-48 VDC |
| Power Consumption | 2.5 W |
| Storage Temperature | -40°C to 85°C |
| Weight | 200 g |
| Mounting | DIN Rail |
| Protection Class | IP30 |
| Standards | IEEE 802.3, IEEE 802.3u |
| Certifications | CE, FCC, RoHS |
| Fiber Port | 1 x 100Base-FX |
| Copper Port | 10/100Base-TX |
| Fiber Connector | SC |
| Humidity | 5% to 95% (non-condensing) |
| Ports | 1x Fiber, 1x Copper |
| Operating Temperature | -40°C to 75°C |
