EN - 18 WWW.SENIXTOOLS.COM
TROUBLESHOOTING
Suspected malfunctions are often due to causes that the users can x themselves. Therefore, check the product using this
section. In most cases the problem can be solved quickly.
PROBLEM POSSIBLE CAUSE SOLUTION
Product does not start
Direction selector at center lock position Push direction selector to proper side
Battery pack is not properly attached Attach properly
Battery pack is completely discharged Charge the battery pack
Product does not reach
full power
Battery pack power is too low Charge the battery pack
Battery pack reaches its life cycle Replace with new battery pack
Unsatisfactory result
Drill/driver bit is dull/damaged Replace with new one
Driver bit/ socket bit is not suitable for intended
operation
Use proper one
To Next Page
Loading...