Fireplace stove SENKO SP 17
5.3. IGNITION
5.3.1. THE PROCESS
Before starting each ring, follow this procedure:
if the chimney has a damper, open it all the way,
fully open the primary air regulator,
open the combustion chamber door,
put rewood in the combustion chamber and light it,
close the combustion chamber door,
looka at the re through the glass of the combustion chamber door,
when the re develops well, add wood in logs as needed,
by regulating the amount of primary air with a manual regulator,
regulate the intensity of the re.
WARNING! Never use ammable materials for ignition.
Always keep liquids such as gasoline, etc., and such and similar liquids
away from your replace stove.
5.3.2. VALUES FOR OPTIMUM USE
The amount of primary air and the underpressure of the chimney must
be adjusted to obtain the desired temperature. The maximum amount of
fuel that can be in the combustion chamber is 2 kg (wood) or 1.5 kg of
briquettes. Regular addition of fuel around 0.5 - 1 kg is recommended.
Optimum values of the replace stove can only be achieved if the nominal
power of the replace stove is selected according to the rules of the trade and
the energy eciency of the building.
To Next Page
Loading...
