SENKO SP - Maintenance and Spare Parts; Combustion Chamber and Summer Maintenance; Disposal and Spare Parts

Fireplace stove SENKO SP 21
7. MAINTENANCE
Over the years of use, damage to vermiculite linings occurs. The
plasticized/painted material on the replace stove is subject to a slight
change in its basic color due to high temperature conditions. Plasticized/
painted materials should be maintained exclusively with means for such
materials according to the instructions of the manufacturer.
7.1. MAINTENANCE OF THE COMBUSTION CHAMBER
Depending on the frequency of use of your replace stove, it’s interior will
be covered with soot and other impurities, which reduces heat exchange and
the overall eciency of the replace stove. For this reason, it is
recommended to regularly brush the inner walls of the replace stove at
least once a year, but more often if necessary.
7.2. MAINTENANCE DURING SUMMER
It is necessary to completely clean the hearth of the replace stove, the
chimney and the ash box. If the room where the replace stove is located
is damp, we recommend that you put salt in a container in the combustion
chamber to absorb the moisture.
7.3. DISPOSAL OF AN OLD STOVE
When the replace stove is no longer for use, it must be handed over to an
authorized service for the disposal of this type of waste for recycling.
It is forbidden to throw an unusable replace stove into nature!
7.4. SPARE PARTS
Use only original spare parts from the manufacturer. If original spare
parts are not used or if the repair is carried out by an unauthorized person,
the warranty will not be recognized.