SENLAN SB40 GENERAL
- 4 -
‧ Install the inverter firmly on an object capable of bearing its weight.
Otherwise, the falling of the inverter may cause injury or damage.
‧ Do not drop metallic material in the inverter. That may lead to
accident.
1.5.2 Wiring
‧ Connect a proper circuit breaker on the input side of the inverter to
protect the inverter from the faults of input wires.
‧ The PE terminal of the inverter must be grounded securely.
Otherwise, electric shock or fire may occur.
‧ The wiring must be done by a qualified electrician after the power is
cut off and the high-voltage indicator extinguishes.
‧ Never connect the output terminals(U, V, W) to the input power.
That will destroy the inverter.
‧ The input power must conform to the specifications on the
nameplate. Otherwise, the inverter may be damaged.
Caution
Danger
Caution
To Next Page
