16 | All-Day Clear Slim All-Day Clear Slim | 17
Setting up your hearing aids with the
All-Day Clear App
1. Download the All-Day Clear App.
2. Create an account. If you have already
created an account online, simply log in.
3. Accept the Data Collection Agreement, so
that your anonymized data can help improve
the app.
4. Select "set up new hearing aids", and select
"No" when asked if your hearing aids were
programmed by a hearing care professional.
(If they were, select "Yes" and follow the
instructions in the app).
5. Plug your charging case into a power source
and put your hearing aids into the charging
case. The indicator lights should blink.
6. Take your hearing aids out of the charging
case. The indicator lights will start to blink
green to indicate they are in the pairing state.
7. Next, you’ll be guided through the pairing
process for your hearing aids that will allow
for:
a. Hands-free calls and wireless music,
podcasts and audiobooks streaming
b. App connectivity – control volume and
sound modes from your phone
If you have an In-Clinic Care Package with
a hearing care professional, the app will
automatically skip to Step 10.
It is only necessary to perform the Bluetooth
pairing procedure once with your hearing
aids. After the initial pairing, your hearing aids
will connect automatically to the app. Initial
pairing process can take up to 2 minutes.
For troubleshooting support for Bluetooth
connections with your hearing aids visit:
www.sennheiser-hearing.com/alldayclear/support
The connection will be maintained as long as
your hearing aids remain on and within range.
Your hearing aids can be paired to up to two
devices and only connect to one at a time.
To Next Page
Loading...
