53
Using the “Conference Manager” software
왘 Click “Network Connections” in the
right column:
The “Network Connections” window
appears.
왘 Click “Manage network connec-
tions” in the left column:
The “Network Connections” window
appears.
왘 Click “Change adapter settings” in
the left column:
The “Network Connections” window
appears.
왘 Double-click “Local Area Connec-
tion”:
The “Local Area Connection Status”
window appears.
왘 Double-click “Local Area Connec-
tion”:
The “Local Area Connection Status”
window appears.
왘 Double-click “Local Area Connec-
tion”:
The “Local Area Connection Proper-
ties” window appears.
왘 Click the “Properties” button:
The “Local Area Connection Proper-
ties” window appears.
왘 Click the “Properties” button:
The “Local Area Connection Proper-
ties” window appears.
왘 Click the “Properties” button:
The “Local Area Connection Proper-
ties” window appears.
왘 In the “This connection uses the
following items” box, scroll to the
bottom.
왘 Double-click “Internet Protocol
(TCP/IP)”.
왘 In the “This connection uses the
following items” box, double-click
“Internet Protocol Version 4 (TCP/
IPv4)”.
왘 In the “This connection uses the
following items” box, double-click
“Internet Protocol Version 4 (TCP/
IPv4)”.
The “Internet Protocol (TCP/IP) Properties” window appears.
Here you can see whether the Windows PC is assigned a static or dynamic IP address. Adjust your central unit as follows:
a) The Windows PC is assigned a dynamic IP address in the network:
Windows XP Windows Vista Windows 7
To Next Page
Loading...
