CXC 700 | 13
Using the CXC 700
Switching NoiseGard on/off
To switch the NoiseGard active noise
compensation on:
1 Slide the NoiseGard switch to ON.
NoiseGard is switched on and your
audio source is momentarily muted.
To ideally adapt the NoiseGard active
noise compensation to the current
noise environment, you can choose
from 3 different modes:
NoiseGard Mode 1
Optimized for: Impact:
Trains, subways,
buses, cars, short
distance flights
Focus on low
frequency range
(100 to 400 Hz)
To Next Page
Loading...
