Sennheiser CXC 700 - Putting the CXC 700 into Operation

8 | CXC 700
Putting the CXC 700 into operation
LED 햴 indications
Putting the CXC 700 into
operation
For powering the NoiseGard active noise
compensation, an AAA size battery is
required. If you are using a recharge-
able battery, the operating time will be
reduced.
When the battery is discharged or not
inserted:
왘 Switch NoiseGard off if you want to
continue listening to your audio
source (see page 13).
LED Meaning
lights up NoiseGard is switched on
flashes
continuously
Battery is almost flat
is off NoiseGard is switched
off
When the battery is almost empty,
the LED flashes continuously.