Putting the headset system into operation
18
Adjusting the audio signal/dial tone
왘 Set the ABC switch to A (default setting), B or C so that you can hear a
clear dial tone in the headset.
Adjusting the microphone sensitivity
By default, the microphone volume control is set to between position 4
and position 5. This setting is suitable for most telephones and your voice
gets reproduced
at a good volume. To change the volume, adjust the
microphone volume control accordingly.
The microphone volume control only adjusts the microphone
sensitivity in Phon
e mode.
왘 Make a call to someone who will help you find th
e correct sensitivity
setting for your microphone (see page 25).
왘 Turn the microphone volume control so that the other party can hear
at a comfortable level.
To Next Page
Loading...
