Need help?Do you have a question about the Sennheiser EK 6042 and is the answer not in the manual?
General| Modulation | FM |
|---|---|
| Signal-to-Noise Ratio | ≥ 110 dB(A) |
| Operating Time | up to 8 hours |
| Input Voltage Range | 12 - 18 V DC |
| Headphone Output | 3.5 mm jack |
| Sensitivity | adjustable |
| Operating Temperature | -10 to +55 °C |
| Audio Output | XLR (balanced) |
| Power Supply | External power supply |
Warns about potential hearing damage from high sound pressure levels.
Details the steps for mounting the EK 6042 into UniSlot/SuperSlot or Sony compatible cameras.
Explains how to connect the EK 6042 to a backpanel adapter for remote operation.
Guides on attaching the accupack adapter and inserting batteries for power.
Details the procedure for powering the EK 6042 receiver on and off.
Explains how to switch between standard, CH1, and CH2 display modes.
Guides users on how to access and navigate the device's operating menu.
Describes the process of synchronizing the receiver with a transmitter via infrared.
Explains how to perform an automatic setup for frequency and transmitter matching.
Covers storing and recalling custom device configurations as scenes.
Guides users on connecting and configuring the EK 6042 via a web browser interface.
To Next Page
