Sennheiser EM 1031-V User Manual

Connects the power cable to the receiver and uses strain relief to prevent accidental disconnection.

Connects two telescopic antennae to ANT.(A) and ANT.(B) sockets and ensures they are fully extended.

Details audio outputs B1 (unbalanced) and B2 (balanced) and the volume control (V) for adjusting output levels.

Checks power supply voltage, plugs in the unit, and turns on the receiver using switch P. The red LED indicates readiness.

Selects the reception channel using switch C for multi-system operation, ensuring all units use the same frequency.

Explains the 7 RF level LEDs (L1) and the receiver's Automatic Squelch Control (ASC) feature.

Details AF level LEDs (L3) and how to adjust sensitivity on the transmitter (LO/HI) to prevent overmodulation.

Explains the receiver's dual input sections, automatic switching, and the L2 indicator for the active diversity channel.

Details mounting bracket assembly, inserting receivers into the rack, and using alternative housings.

Ensures adequate forced ventilation for permanent installations in desks or racks to allow air circulation.

Ensures sufficient ventilation and cooling when operating multiple EM 1031-V receivers together in a rack.