Need help?Do you have a question about the Sennheiser EM 2004 UHF and is the answer not in the manual?
General| Modulation | FM |
|---|---|
| Presets | 12 |
| Dynamic Range | > 100 dB |
| Signal-to-Noise Ratio | > 110 dB |
| Total Harmonic Distortion | <0.9% |
| Audio Output | XLR |
| Operating Range | Up to 100 m (depending on conditions) |
| Receiver Type | Diversity Receiver |
Identification and function of front panel controls, numbered 1 through 9.
Identification and function of rear panel connectors and controls, numbered 10 through 15.
Guidelines for positioning the receiver to optimize reception and avoid interference.
Connecting detached antennas and important tips for their placement.
Connecting AF output and headphone jack for monitoring and audio output.
Details on connecting the receiver to the power supply and voltage selection.
Procedures for setting AF output level and squelch for optimal performance.
Details on system expansion and operating permit requirements.
Identifies common problems and their likely causes for the receiver's operation.
List of components and accessories required for a 2-channel diversity system setup.
Detailed technical specifications for the EM 2004 VHF/UHF receiver.
To Next Page
