Do you have a question about the Sennheiser ew 300 G2 and is the answer not in the manual?
RF Output Power | 30 mW |
---|---|
Frequency Range | 518 - 866 MHz |
THD, total harmonic distortion | < 0.9% |
Signal-to-Noise Ratio | > 110 dB(A) |
Pilot Tone Squelch | Yes |
Dimensions | 82 x 64 x 24 mm |
Operating Time | 8 hours |
Modulation | FM |
Max. Deviation | ±48 kHz |
Power Supply | 2 x AA batteries or rechargeable batteries |
Battery Life | 8 hours |
Weight | 160 g |
Explains the system of pre-set and user-defined channels within banks.
Essential safety precautions for operating Sennheiser equipment.
Steps for connecting antennas and the power supply to the receiver.
How to connect the receiver's audio outputs to external equipment.
Guidance on inserting, replacing, and charging batteries/accupacks.
Instructions for battery insertion and changing the microphone capsule.
Procedures for powering the rack-mount receiver on and off.
Procedures for powering bodypack and radiomicrophone transmitters on and off.
Explains the role of buttons when navigating and operating menus.
Guides on how to enter menus and choose specific options.
Steps to leave the operating menu and return to the standard display.
How to switch between channel banks and tune frequencies.
Process for finding available, interference-free frequencies.
Interpreting scan results and adjusting audio output levels.
Loading factory defaults and managing pilot tone functions.
Procedures for resetting the device and enabling/disabling the lock mode.
Navigating bank, channel, and tuning menus for transmitters.
Entering a name and loading factory preset default settings.
Managing pilot tone transmission and activating the lock mode.
Steps to exit the transmitter operating menu.
Guidance on selecting channel banks and individual channels.
How to view previously scanned free channels.
Performing a new scan and unlocking previously locked channels.
How to enable or disable the lock mode to prevent accidental changes.