EasyManua.ls Logo

Sennheiser em 300 g2 User Manual

Sennheiser em 300 g2
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SA 040818
Subject to alterations
Sennheiser electronic GmbH & Co. KG • 30900 Wedemark
Phone: +49 (5130) 600 0 • Fax: +49 (5130) 600 300 1/32
EM 100 G2
EM 300 G2
EM 500 G2
Service manual
Short Description
The three stationary receivers EM 100 G2, EM 300 G2 and EM 500 G2
are
,True Diversity receivers and are equipped with the HDX noise reduction
system. Each receiver has a switching bandwidth of 36MHz in the UHF band.
Features
1440 UHF frequencies available for interference-free reception.
Direct channel selection via presets.
Scan function for finding free receive channels.
Low battery warning on transmitter and receiver.
Squelch pilot tone for interference-free operation.
Sound check mode for checking transmission conditions
(only EM 500 G2).
POWER
SET
SET
ON
300
ON
SET
500
EM 100 G2
EM 300 G2
EM 500 G2
Question and Answer IconNeed help?

Do you have a question about the Sennheiser em 300 g2 and is the answer not in the manual?

Sennheiser em 300 g2 Specifications

General IconGeneral
Pilot Tone Frequency32.768 kHz
Audio Input Connector3.5 mm jack
THD, total harmonic distortion< 0.9 %
Signal-to-noise ratio> 110 dB(A)
Battery Type2 x AA
Battery Life8 hours
ModulationFM
RF Output Power30 mW
Max. Frequency Deviation±48 kHz

Related product manuals