Sennheiser XSW IEM Series User Manual

XS Wireless IEM
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
XS Wireless IEM - v1.0, 02/2022
Instruction Manual
(PDF export of the original HTML manual)
This PDF document is a PDF export of an interactive manual in HTML format.
When displayed in PDF format, it is possible that not all content and interactive
elements in the HTML instructions are included, as these cannot be displayed in
PDF format.
We recommend using the complete and interactive HTML instructions.
You can find these in the Sennheiser Documentation App, which is available free of
charge for iOS and Android. Alternatively, the HTML instructions are also available
in the download area of the product page:
www.sennheiser.com/xsw-iem

Sennheiser XSW IEM Series Specifications

General

RF Output Power	10 mW
Input Voltage Range	12 V DC
THD, total harmonic distortion	< 0.9%
Wideband FM modulation	Yes
Power supply	2 x AA batteries
Antenna connector	BNC
Connector	BNC
Input Connectors	2 x XLR / 1/4" combo jack, balanced
Audio input	2 x XLR / 1/4" combo jack, balanced

Summary

XSW IEM SR Stereo Transmitter

SR Transmitter Description

Description of the XSW IEM SR stereo transmitter features and design.

SR Transmitter Specifications

XSW IEM EK Bodypack Receiver

EK Receiver Description

Description of the XSW IEM EK bodypack receiver features and design.

EK Receiver Specifications

Getting Started

Starting Up the XSW IEM SR

Initial setup and connection of the XSW IEM SR transmitter.

Connecting SR Transmitter to Power

Instructions for connecting the SR transmitter to the power supply.

Connecting Audio Signals to SR

How to connect audio sources to the SR transmitter.

Starting Up the XSW IEM EK

Inserting batteries and powering on the XSW IEM EK receiver.

Connecting Earphones to EK Receiver

Instructions for connecting earphones to the EK receiver.

Using the XSW IEM SR Transmitter

SR Transmitter Controls

Switching SR Transmitter On/Off

Procedures for turning the XSW IEM SR on, off, and to standby.

Using the Headphone Output

Setting Input Sensitivity (GAIN)

Selecting Frequency Bank and Channel

Setting Transmission Frequency

Using the XSW IEM EK Receiver

EK Receiver Controls

Switching EK Receiver On/Off

Procedures for turning the XSW IEM EK receiver on and off.

EK Receiver Display Panel

Setting Frequency Bank and Channel on Receiver

Setting Receiving Frequency

Radio Link and Soundcheck

Performing a Soundcheck

Testing transmission quality and signal levels in the operating area.

Establishing a Radio Link

Steps to create a radio link between transmitter and receiver.

Synchronizing Devices

Steps to synchronize the transmitter and receiver using infrared interfaces.

Advanced Settings and Functions

Setting the Limiter (LIM)

Setting the FOCUS

Panorama Setting

Specifications and Variants

XSW IEM SR Specifications

Detailed technical data for the XSW IEM SR transmitter.

XSW IEM EK Specifications

Detailed technical data for the XSW IEM EK receiver.