EasyManuals Logo

Sennheiser EW 572 G3 Product Sheet

Sennheiser EW 572 G3
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ew 572 G3 Instrument Set
ew 572 © Instrument Set
RF Wireless Systems | evolution wireless G3
General Description
The EW 572 G3 system offers automatic wireless setup via the enhanced
sync function, the components can be programmed without transmitting
RF (silent configuration mode). The set is also equipped with soundcheck
mode, which allows the signal strength and the RF and audio levels to
be checked continuously on the large front panel display. An enhanced
AF frequency response that starts at 25 Hz will satisfy even the most
discriminating 5-string bass players. An integrated 5-band equalizer,
guitar tuner, and a guitar cable virtual length emulator complete this
feature-rich set.
Technical Specifications
ew 500 ©
Modulation ............................................... wideband FM
Frequency ranges .......................516–558, 566–608,
................... 626–668, 734–776, 780–822, 823–865
Transmission/Receiving
frequencies ............ 20 channel banks, 6 user banks,
...................................32 factory preset channels each
Switching bandwidth ........................................42 MHz
Noise reduction system .....................Sennheiser HDX
AF frequency response .......................25 – 18,000 Hz
S/N ratio (at 1mV and peak deviation) .. 115 dBA
THD (at nominal deviation and 1 kHz) ........ . 0.9 %
EM 500 ©
Receiver principle ................................... True Diversity
Sensitivity (with HDX,
peak deviation) ................... <2.5 µV at 52 dBA
eff
S/N
Adjacent channel rejection .............................. 75 dB
Intermodulation attenuation .......................... 70 dB
Blocking ............................................................... 75 dB
Pilot-tone squelch....................................... detachable
Antenna inputs ...................................... 5 BNC sockets
AF output voltage (at peak deviation,
1 kHz AF) ......................... 1/4“ (6.3 mm) jack socket,
................................ unbalanced: +12 dBu XLR socket,
...........................................................balanced: +18 dBu
Power supply ......................................................12 V DC
Dimensions ................................7.95“ x 8.35“ x 1.69“
Weight ................................................. approx. 2.16 lbs
SK 500 ©
RF output power at 50 ..................typ. 30/10 mW,
......................................................................... switchable
AF frequency response ...........25 – 18,000 Hz (Line)
......................................................80 – 18,000 Hz (Mic)
Max input voltage transmitter ............................3 V
eff
Input impedance
transmitter........................ 40 k, unbalanced / 1M
Power supply ..............................2 AA batteries, 1.5 V
Nominal voltage ..................................................... 2.4 V
Operating time ..................................................typ. 8 h
Dimensions ................................3.23“ x 2.52“ x 0.94“
Weight .................................................. approx. 5.64 oz
Kit includes:
(1) EM 500 G3 rack-mountable receiver
(1) SK 500 G3 bodypack transmitter
(1) Ci1 instrument cable
(1) GA 3 rack-mount kit
For recommended accessories please visit
www.sennheiserusa.com
Features
Sturdy metal housing
PC-supported frequency management for transmitter and receiver
Tunable UHF frequencies within a large switching bandwidth
Integrated guitar tuner & cable emulation circuit
Programmable MUTE switch
Ethernet port for connecting to the Wireless Systems Manager
(WSM) software for control via computer – this delivers a good
overview of monitoring and professional data management for
multi-channel systems
Wireless synchronization of transmitters via infrared interface
Enhanced frequency band with up to 32 compatible frequencies
42 MHz bandwidth, 1,680 switchable frequencies
Increased range for audio sensitivity
Large, illuminated dot matrix display with dual color warning
indicator
More control options (menu)
Enhanced AF frequency range
Switchable RF output power (10/30 mW)
Soundcheck mode
Integrated equalizer
(2) AA batteries for more than 8 hours of use
4-level battery indicator for transmitter
Contacts for recharging the BA 2015 accupack directly in the
transmitter
HDX compander for crystal-clear sound
True diversity receiver for optimum reception
Includes installation kit for 19” rack mounting (1 RU)

Other manuals for Sennheiser EW 572 G3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sennheiser EW 572 G3 and is the answer not in the manual?

Sennheiser EW 572 G3 Specifications

General IconGeneral
ModulationWideband FM
RF Bandwidth42 MHz
Pilot Tone SquelchYes
THD< 0.9%
Transmitter Battery LifeTypically 8 hours
System TypeWireless
Operating Time8 hours
RF Output Power30 mW

Related product manuals