Sennheiser Headset HMD 410-6 User Manual

HMD 410-6
General Description
The HMD 410-6 headset features dynamic open headphones. The micro-
phone’s super-cardioid pick-up pattern ensures optimum speech intelligi-
bility in noisy environments. Designed for use with interpreting and com-
munications equipment, radiotelephone equipment for air traffic control
and cabin crew personnel, intercom systems and language laboratories.
Features
j
Extremely light
j
Two-piece adjustable headband, superb comfort
j
Excellent speech intelligibility
j
Flip-away earpiece for single-sided listening
j
Microphone can be worn on either left or right-hand side
j
Delivery includes: 1 HMD 410-6, 1 MZW 414 windshield
Technical Data
Headphones
Transducer principle..............................................................dynamic
Ear coupling ...........................................................supra-aural, open
Frequency response ................................................. 20 – 18,000 Hz
Characteristic SPL .......................... 100 dB ± 3 dB at 1 kHz, 1 mW
Nominal impedance ............................................ 600 Ω per system
Load rating............................................................................. 100 mW
THD ................................................................................................< 1 %
Contact pressure ..........................................................approx. 2.5 N
Weight (without cable)............................................................ 130 g
Microphone
Transducer principle..............................................................dynamic
Frequency response ................................................. 50 – 12,000 Hz
Output voltage (1 kHz) ................................................1 mV ± 3 dB
Min. terminating impedance.................................................. 200 Ω
Connections
Connection cable................................................... 1.8 m steel cable,
single-sided, unterminated
KD 414 ................................................................................ Superniere
Cat No. 002153
Replacement Parts
j
Ear pads (1 pair) Cat No. 033175
Headsets | Communications Headset

Sennheiser Headset HMD 410-6 Specifications

General

Microphone Type	Dynamic
Connector	6.3 mm stereo jack
Ear Coupling	Circumaural
Connection	Wired
Microphone	Yes
Cable Length	3 m
Microphone Frequency Response	80 - 15, 000 Hz

Summary

General Description

Features

Replacement Parts

Technical Data

Headphones

Technical specifications for the HMD 410-6 headphones, including transducer, ear coupling, frequency response, SPL, impedance, and load rating.

Microphone

Technical specifications for the headset's microphone, including transducer, frequency response, output voltage, and minimum terminating impedance.

Connections

Details on the connection cable, including its length, material, and termination type.