Need help?Do you have a question about the Sennheiser MKH 816 TU-3 and is the answer not in the manual?
General| Brand | Sennheiser |
|---|---|
| Model | MKH 816 TU-3 |
| Category | Microphone |
| Language | English |
Powering according to DIN 45595 for balanced audio signals.
Powering via modulation conductors for unbalanced audio signals.
Transistorized RF condenser microphone, DC voltage via connecting cable (A-B powering).
Key characteristics including directionality, ruggedness, and sensitivity.
Connects to amplifier via battery adapter MZA 16 TU or power supply MZN 14 TU.
Contact 3 of cable grounded; possible with MZN 16 TU after modification.
Reduce output voltage with a voltage divider for better signal-to-noise ratio.
Direct powering with 12V ±2V, stabilized, filtered, low noise.
Shock mount with rubber suspended plastic clamps to prevent handling noise.
Combination including windscreen basket, shock mount, and pistol grip for outdoor use.
Sponge windscreen for the MKH 816 T microphone.
Adapter for powering one condenser microphone (AB-powering).
Unit for simultaneously powering two microphones (AB-powering).
To Next Page