Need help?Do you have a question about the Sennheiser MKH 124 MKH 125 MKH 126 and is the answer not in the manual?
General| Brand | Sennheiser |
|---|---|
| Model | MKH 124 MKH 125 MKH 126 |
| Category | Microphone |
| Language | English |
Explains the high-frequency circuit and low impedance output of RF condenser microphones.
Describes the MKH 124 connection to the Microport transmitter SK 1008-3.
Details the MKH 125 T for AB-powering and its wiring requirements.
Details connecting microphones to amplifier inputs via MZA 15 or MZN 16 T.
Explains connecting to unbalanced inputs, often on tape recorders, with caution.
Describes using a voltage divider for amplifiers with very high input sensitivity.
Discusses connecting to amplifiers with input impedances less than 200 Ω.
Explains direct powering from an amplifier with voltage and current specifications.
Lists specifications for the MKH 124 microphone.
Lists specifications for the MKH 125 T microphone.
Lists specifications for the MKH 125 T-U microphone.
Lists specifications for the MKH 126 P 48 microphone.
Lists specifications for the MKH 126 P 48-U microphone.
Describes battery adapters MZA 15 and MZA 15-U for powering microphones.
Details power units MZN 16 T, T-U, MZN 16 P 48 and P 48-U for powering microphones.
Covers transistor amplifier KAT 15-2 and roll-off-filter MZF 15.
Lists connecting cables KA 1, KA 7, KA 7-1, and KAM 1-5.
To Next Page