Need help?Do you have a question about the Sennheiser MKH 8020 and is the answer not in the manual?
General| Type | Condenser |
|---|---|
| Polar Pattern | Omnidirectional |
| Frequency Response | 10 Hz - 60 kHz |
| Nominal Impedance | 25 Ω |
| Maximum Sound Pressure Level (passive) | 138 dB SPL |
| Connector | XLR-3 |
| Diameter | 19 mm |
| Weight | 80 g |
| Acoustical operating principle | Pressure transducer |
| Power Supply | Phantom Power |
| Min. terminating impedance | 1000 Ω |
| Supply Voltage | 48 V ± 4 V |
Defines proper usage and contrasts with improper use for safe operation.
Details phantom powering, XLR connections, and impedance for proper audio signal.
Explains how to attach the microphone using the provided clip and thread options.
Describes how to use the windshield to reduce wind noise effectively.
States the duration of the product warranty provided by the manufacturer.
Confirms the device meets essential requirements of EU directives for safety and EMC.
Provides instructions for responsible disposal of the product at its end of life.
To Next Page
