Need help?Do you have a question about the Sennheiser MKH 416-P48 U3 and is the answer not in the manual?
General| Acoustical operating principle | Pressure gradient transducer |
|---|---|
| Frequency Response | 40 Hz - 20 kHz |
| Sensitivity in free field, no load (1kHz) | 25 mV/Pa |
| Equivalent noise level A-weighted | 13 dB-A |
| Max SPL for THD = 1% | 130 dB SPL |
| Current consumption | 2 mA |
| Connector | XLR-3 |
| Signal-to-Noise Ratio | 81 dB (A-weighted) |
| Polar Pattern | Supercardioid |
| Impedance | 25 ohms |
| Min. terminating impedance | 1000 ohms |
| Powering | 48 V +/- 4 V Phantom |
| Dimensions | 19 mm x 250 mm |
Read and keep safety instructions and manual for product. Always include all instructions when passing on.
Only use manufacturer-specified attachments, accessories, and spare parts.
Ensure protective basket and pop shield are dry to prevent capsule malfunctions or damage.
Connect microphone only to inputs providing 48V phantom powering per IEC 61938.
Refer all servicing to qualified personnel for any damage or malfunction.
Reduce volume to prevent hearing/speaker damage and acoustic feedback.
MKH 416 is a directional microphone for film, TV, and broadcast, operating on RF principle for 48V phantom power.
To Next Page