Sennheiser MKH 110 - User Manual

.
"
~-o~~H)l1I\I
-_O~~H)l1I\I
IOldw3,P apolf\I
apln~ sJaSn
6unllalues6unualpas
H:I~I:I H N N:I~::Qj:::
,.1

Summary

Instrumentation Microphones MKH 110 and MKH 110-1

Short Description

These microphones are specially designed pressure transducers for instrumentation purposes.

General Data

Provides general specifications like output plug wiring, dimensions, and weight.

Technical Data

Details key technical specifications for MKH 110 and MKH 110-1 models.

Technical Notes

High Frequency Circuit

Explains the low impedance output of RF-condenser capsules and the high-frequency voltage requirement.

Powering and Connection

Details powering requirements and connection principles for MKH 110 and MKH 110-1 microphones.

Connection to Amplifiers with Powering Facilities

Describes direct powering of the microphone from an amplifier with appropriate voltage source.

Input Sensitivity and Input Impedance

Provides guidance on connecting microphones to amplifiers based on input impedance and sensitivity.

Sennheiser MKH 110 Specifications

General

Type	Condenser
Polar Pattern	Omnidirectional
Impedance	150 Ohms
Power Supply	48V Phantom Power
Signal-to-Noise Ratio	72 dB