Need help?Do you have a question about the Sennheiser MKH 60 and is the answer not in the manual?
General| Acoustical operating principle | Pressure gradient transducer |
|---|---|
| Polar Pattern | Supercardioid |
| Nominal impedance | 150 Ohms |
| Impedance | 150 Ω |
| Min. terminating impedance | 1000 Ohms |
| Current consumption | 2 mA |
| Connector | XLR-3 |
| Frequency Response | 40 Hz - 20 kHz |
| Maximum sound pressure level (passive) | 130 dB SPL |
| Max SPL | 130 dB SPL |
| Powering | Phantom Power 48 V |
Details on 48 V phantom power, XLR connector, wiring, and impedance for proper operation.
How to use the 10 dB pad switch to manage high output levels and prevent distortion.
Function of the switchable roll-off filter for reducing low-frequency noise from handling or wind.
Use of the presence filter to compensate for high-frequency loss due to propagation and windscreens.
Guidance on connecting to balanced, floating microphone inputs and available powering options.
To Next Page
