To Next PageTo Next Page
Need help?Do you have a question about the Sennheiser RS 120 II and is the answer not in the manual?
General| Impedance | 24 Ω |
|---|---|
| Driver type | Dynamic |
| Ear coupling | Supraaural |
| Headphone frequency | 22 - 19500 Hz |
| Headphone sensitivity | 106 dB |
| Total Harmonic Distortion (THD) | 0.7 % |
| Battery type | AAA |
| Number of batteries supported | 2 |
| Continuous audio playback time | 20 h |
| Wireless range | 100 m |
| RF connectivity | Yes |
| Connectivity technology | Wireless |
| Product color | Black |
| Wearing style | Head-band |
| Volume control | Rotary |
| Recommended usage | Music |
| Microphone type | Not available |
Weight and Dimensions| Weight | 230 g |
|---|
Connect the transmitter to an audio source, choosing a suitable place near your audio source.
Turn ear pads to access the battery compartments for battery installation.
Insert NiMH batteries and charge for at least 24 hours before first use.
Switch on the audio source, which automatically powers the transmitter on and off.
Turn on headphones, set volume to low, then adjust to desired level.
Adjust the TUNE control and potentially change transmission channel to improve signal clarity.
Provides warranty duration and directs users to the website for full conditions.
Lists compliance directives and availability of the declaration on the Sennheiser website.
