36 | Sonite R
15. Rebooting your hearing aid
Use this technique if your hearing aid is in an error
state. This will not remove or delete any program
or settings.
1.
Press the lower part of the multi-function button
for at least 15 seconds. It does not matter if the
hearing aid is switched on or off before you start
pressing the button. There is no light or acoustic
notification at the end of the 15 seconds.
2.
Place the hearing aid in the power-connected
charger and wait until the indicator light blinks
green. This can take up to 30 seconds. The hearing
aid is now ready to use.
To Next Page
Loading...
